Simultaneous dispensing: all the colorants dispensed at the same time.
Stainless steel piston pump (120ml/stroke) easy to be replaced by non-expert operator.
16 canisters available in 3 and 5 liters made of POM polymer material. (**)
32 canisters available in 1,5 - 3 - 5 liters made of POM polymer material. (**)
Each canister has an independent motorized agitator
Automatic closure of the nozzle head with humidifying sponge to avoid drying-out .
Minicomputer with front panel: it allows the use of the equipment also when the PC is not working .
Flow rate (per circuit): 0.3 Lt./min. (*)
Accuracy: +/- 1% - min. 1/768 fl. oz. (*)
Two-way recirculation of the colorants from canister to pump, to valve and back.
Ergonomic: frontal protruding dispensing point and low refilling height.
ABS Charcoal grey color external panels (special colors as optional).
Stirring and re-circulation programmable cycles.
Dispensing head max diameter: 40 mm.
Electric central shelf, with safety photocell for automatic detection of the can.
Central shelf: available space for positioning cans/pails 450 mm - in case of use of either bigger containers or a scale , kindly inform Dromont about dimensions. In this case, the available container space decreases to 340 mm.
Sequential dispensing by weight (or a combination of sequential by weight & simultaneous by volume) available as option.
(*) depending on colorant rheology
(**) please verify compatibility with POM (IUPITAL F25-03) material and your colorants
The equipment has a space on the top to host the PC and monitor (monitor as option).
No need of side table to support the PC.
Protruding nozzle head for easy check and cleaning with automatic closing system auto-cap and humidifier.
Comfortable checking of any drying particles.
Automatic lifting shelf with servo motor, managed by front control panel up-down arrows.
two side movable shelves for extra cans holding with multiple adjustable positions.
Simultaneous dispensing 0.3 l/min.
Precision 1/768 fl . oz.
Frontal dispensing point
Brilliant dispensing time and accuracy, low cost of ownership 50% below of competition
Compacta 16 1070x860x1375h
Compacta 32 1200x1150x1185h
VOC free compliant autocap. Stainless steel piston pump
Simultaneous dispensing by piston pumps in stainless steel pump can be easily replaced by customer in 77” only does not need re-calibrations after replacement: plug and go! has much lower wear than gear pump up to 8 colorants dispensed at same time.
Protected, clean and safe area, all-in-one rack.
Rear door panel includes all electronics components in one board, no other components outside.
All side panels can be quickly removed for a smooth access to every part of the machine.